You’re replacing all four tires, but are you checking the TPMS sensors too? In this episode, we share TPMS sensor replacement tips that help prevent costly comebacks and keep your customers safe on the road.
Test Sensors Before You Touch
If the vehicle is 7 to 9 years old, the TPMS sensor batteries likely have low life. The TPMS light won’t always illuminate when a battery runs low, so make sure to test all four sensors before service. A failed sensor a week later could turn into your shop’s issue.
TPMS Sensor Replacement Tips to Share With Customers
Do your customers understand why TPMS matters? Tire pressure affects braking, handling, fuel economy, and safety. Use this as a chance to explain how TPMS alerts help them avoid dangerous situations—and unnecessary tire wear.
Wake Up and Program Sensors Correctly
Manufacturers ship new TPMS sensors in storage mode to conserve battery during transit. Use a TPMS tool to wake up and program the sensor with a cloned, new, or random ID so it communicates properly with the vehicle.
Check for TPMS Signal Interference
When you see a blinking TPMS warning light with no DTCs, external interference could be the cause. Look for ham radios, chargers, or high-tension wires nearby. Clearing that interference might resolve the issue.
Looking for more Autel TPMS tips? Click here.
This content is sponsored by Autel.
The post Autel TPMS Tips: Tire Replacement and Troubleshooting appeared first on Tire Review Magazine.
